This very solid machine is designed to give years of reliable work.
It has 3 spacers which are used in various combinations to position the copper centrally to the bending block.
In the basic form of the machine, copper is bent to the desired angle as measured by a protractor. The position of the bending block is indicated on a scale fitted to the top of the machine. Repeat bends can then be made to the same position. For an enhanced capability, the machine is supplied with a cam and limit-switch which may be set to stop the machine automatically at the desired position. Finally, in the top-of-the-range format, an electronic angle control system may be fitted whereby the desired angle is preset on a counter, and the machine will stop and reverse automatically.